Overview
The HPE MSA 2060 is a flash-ready hybrid storage system designed to provide hands-free, affordable application acceleration for small and remote office deployments. Don’t let the low cost fool you. It gives you a combination of simplicity, flexibility and advanced features you might not expect in an entry-level array. Start small and scale as needed with any combination of solid-state drives (SSDs), high-performance enterprise SAS HDDs, or low-cost midrange SAS HDDs. Capable of delivering up to 395,000 IOPS, 80 per cent faster than the previous generation, the new MSA 2060 delivers plenty of horsepower for even the most demanding workloads.
HPE MSA 2060 Storage
HPE MSA 2060 Storage-Rear View
| 1. | Power Switch | 5. | 12Gb SAS expansion port |
| 2. | Redundant Power and Cooling Module (AC or DC) | 6. | Controller A (Inverted) |
| 3. | Host connection ports (8/16Gb FC, 10/25GbE iSCSI, 10GBase-T iSCSI, or 12Gb SAS depending on model) | 7. | Controller B |
| 4. | Ethernet management port |
| HPE MSA 2060 Storage | |
| Array | |
| Access Type | Block |
| Form Factor | 2U, SFF or LFF |
| Number of controllers per array | 2 |
| Number of host ports per array | 8 |
| FC host connectivity | 8/16Gb |
| iSCSI host connectivity | 10/25GbE, 10GBase-T |
| SAS host connectivity | 12Gb |
| Cache, per array | |
| Max Read cache per array | 8TB |
| Data (read/write) cache + system memory per array | 24GB |
| Pool Capacity | Two Pools with 1 PB each |
| RAID Levels supported: | RAID 0*,1, 5, 6, 10, MSA-DP+
Notes: *Read Cache Only |
| Enclosures | |
| Expansion Drive Enclosures | 0-9 enclosures |
| LFF/SFF array/enclosure mixing | Supported |
| Maximum number of drives per array enclosure | 24 SFF or 12 LFF |
| Maximum number of drives per drive enclosure | 24 SFF or 12 LFF |
| Drive enclosure interface type | 12Gb SAS |
| Drives | |
| Maximum total HDDs per array | 240 SFF / 120 LFF |
| Maximum total SSDs per array | 240 SFF / 120 LFF |
| Max raw capacity per array enclosure | 184.32TB SFF / 240TB LFF |
| Max raw capacity per drive enclosure | 184.32TB SFF / 240TB LFF |
| Max raw capacity per array | 1843.2TB (All SFF) / 2.4 PB (All LFF) |
| Drive Capacities | |
| SFF SSDs | 960GB, 1.92TB, 3.84TB, 7.68TB |
| LFF SSD | 1.92TB |
| SFF HDDs | 15K: 900GB
10K: 600GB, 1.2TB, 1.8TB, 2.4TB |
| LFF HDDs | 7.2K: 6TB, 8TB, 10TB, 12TB, 14TB, 16TB, 18TB, 20TB |
| Self-Encrypting SSDs | SFF: 960GB, 1.92TB
LFF: 1.92TB |
| Self-Encrypting HDDs
Notes: Sold in 6 Pack bundles only |
SFF: 900GB, 2.4TB
LFF: 12TB |
| Software Features | |
| Thin Technologies | Thin Provisioning, Space Reclamation, Thin Rebuild |
| Tiering | Performance Tier, Standard Tier, Archive Tier |
| Replication | Snapshots (512), Volume Copy, Remote Snaps |
| Quality of Service | Virtual Tier Affinity |
| Additional Features | |
| Maximum number of volumes | 512 |
| Maximum number of snapshots | 512 |
| Maximum number of hosts | 512 |
| Maximum number of initiators | 1024 |
| Customer self-installable | Yes |
| Customer self-repairable | Yes |
| Customer self-upgradeable | Yes |
| Health Check analytics | Yes |
| Energy Star Certified | Yes |
| MSA 2060 Technical Specifications | |
| Power requirements | |
| Input Power Requirements (typical-running I/O)
SFF/LFF arrays |
120VAC 3.07A, 293-361 W; 220VAC 1.58A,289-352W |
| Max Input Power | 100-240 VAC, 50/60 Hz., 4.38-2.17A; 48-60 VDC 10.4A/8.3A |
| Heat Dissipation | 1766 BTU/hr |
| Temperature and Humidity Ranges | |
| Operating Temperature | ASHRAE A3 5°C to 40°C, -12°C DP & 8 to 24°C DP
(Derate maximum allowable dry-bulb temperature 1°C/175m above 900m) |
| Shipping Temperature | -40°F to 158°F (-40°C to 70°C) |
| Operating Humidity | Up to 85% RH |
| Non-Operating Humidity | Up to 90% RH @ 30°C |
| Physical | |
| Height | 3.5 in (8.9 cm) |
| Depth (Back of chassis ear to controller latch) | 20.0 in (50.8 cm) |
| Depth (Front of chassis ear to back of cable bend) | 26.4 in (66.9 cm) |
| Width (Chassis only) | 17.5 in (44.5 cm) |
| Width (Chassis with bezel ear caps) | 19.0 in (48.3 cm) |
| Weight LFF Enclosure | |
| Chassis empty | 11 lb (5 kg) |
| Controller enclosure (fully populated with FRUs and disks) | 71 lb (32 kg) |
| Expansion enclosure (fully populated with FRUs and disks) | 62 lb (28 kg) |
| Weight SFF Enclosure | |
| Chassis empty | 11 lb (5 kg) |
| Controller enclosure (fully populated with FRUs and disks) | 66 lb (30 kg) |
| Expansion enclosure (fully populated with FRUs and disks) | 55 lb (25 kg) |
| Acoustic Ratings | |
| Sound Power | A weighted sound power LWAd – 8.3 B |
| Sound Pressure | A weighted sound pressure LpAm – 74dBA |
| Shock and Vibration | |
| Shock, Operational | 5G, 11 ms |
| Shock, Non-Operational | 15G, 10ms |
| Vibration, Operational | 5-500Hz, 0.18 Grms |
| Vibration, Non-Operational | x-axis (5-300Hz) 0.8 Grms
z-axis (5-300Hz) 1.2 Grms |
| Altitude | |
| Altitude, operating | 3000m (10,000 feet) |
| Altitiude, non-operating | 12,192m (40,000 feet) |
Configuration Information
| MSA 2060 Storage Systems | |
| Description | SKU |
| HPE MSA 2060 16Gb Fibre Channel LFF Storage | R0Q73B |
| HPE MSA 2060 16Gb Fibre Channel LFF TAA-compliant Storage | R9G39B |
| HPE MSA 2060 16Gb Fibre Channel SFF Storage | R0Q74B |
| HPE MSA 2060 16Gb Fibre Channel SFF TAA-compliant Storage | R9G38B |
| HPE MSA 2060 10GbE iSCSI LFF Storage | R0Q75B |
| HPE MSA 2060 10GbE iSCSI SFF Storage | R0Q76B |
| HPE MSA 2060 10GbE iSCSI SFF TAA-compliant Storage | R9G40B |
| HPE MSA 2060 12Gb SAS LFF Storage | R0Q77B |
| HPE MSA 2060 12Gb SAS SFF Storage | R0Q78B |
| HPE MSA 2060 12Gb SAS SFF TAA-compliant Storage | R9G41B |
| HPE MSA 2060 10GBASE-T iSCSI LFF Storage | R7J72B |
| HPE MSA 2060 10GBASE-T iSCSI SFF Storage | R7J73B |
| HPE MSA 2060 16Gb Fibre Channel SFF 12TB Flash Bundle | S2E37B |
| HPE MSA 2060 10GbE iSCSI SFF 12TB Flash Bundle | S2E38B |
| HPE MSA 2060 16Gb Fibre Channel SFF 23TB Flash Bundle | S2E39B |
| HPE MSA 2060 10GbE iSCSI SFF 23TB Flash Bundle | S2E40B |
| HPE MSA 2060 16Gb Fibre Channel SFF 46TB Flash Bundle | S2E41B |
| HPE MSA 2060 10GbE iSCSI SFF 46TB Flash Bundle | S2E42B |